Steps to Safely Change a Tire
Knowing how to change a tire is an essential skill for any driver. With the correct equipment and methods, fixing a minor issue in your driveway or being stranded on the side of the road is simple. Below is a step-by-step guide to help you get back on the road safely.
Gather Your Tools
Before you begin, ensure you have all the necessary tools a tire change service pro would need: a jack, a lug wrench, a spare tire, and the vehicle’s manual. These items should be in your car at all times, ready for use in an emergency.
Find a Safe Location
When you need to change a tire, it’s important to find a flat, stable surface away from traffic. If possible, pull over to a secure location, turn on your hazard lights, and engage the parking brake to prevent the car from rolling.
Loosen the Lug Nuts
Use your lug wrench to loosen the lug nuts on the flat tire. Turn the wrench counterclockwise, but don’t remove them entirely yet. Loosening the nuts while the car is still on the ground ensures stability.
Raise the Vehicle
Position the jack under the car’s frame, following the guidelines in your vehicle’s manual. Raise the car until the flat tire is about six inches off the ground. Make sure the car is stable before moving on.
Remove the Flat Tire and Install the Spare
Now that the vehicle is lifted, remove the loosened lug nuts and pull off the flat tire. Place the spare tire on the hub and align the holes with the lug bolts. Hand-tighten the lug nuts before lowering the car.
How to Change a Tire for a Safe Drive
Once you’ve lowered the car back to the ground, tighten the lug nuts completely using the wrench. Congratulations, you’ve learned how to change a tire. It’s important to check the tire pressure on your spare and make sure everything is secure before driving. Reach out Kings Towing And Roadside Assistance LLC for reliable tire service in Riverside, CA, for top-notch towing services, call us at (424) 200-7285 today!